Innovative engineering, technology and industry

All Items

• INCREASING THE POST-REPAIR DURABILITY OF HYDRAULIC PUMPS OF THE NSh-K MODIFICATION BY USING EPILAM COATINGS ON THE WORKING SURFACES OF THE PARTS

  Petro Melyantsov

  14-26

• INCREASING THE RESISTANCE OF WELDING JOINTS IN MEDIUM CARBON STEEL PRIOR TO CTACK FORMATION

  Oksana Klochko, Evgeniya Deryabkina

  69-73

• INFLUENCE OF PLANT COMPONENTS ON IMPROVING THE QUALITY OF LOW-FAT CREAM

  Taisia Ryzhkova, Iryna Heida

  33-38

• INFLUENCE OF SOIL AND CLIMATE CONDITIONS OF GRAPE GROWING ON THE QUALITY OF TABLE RED WINES

  Mykola Bondar, Ирина Бабич, Петр Бойко, Оксана Деменюк

  70-76

• INNOVATIONS IN THE CREATION OF ECOLOGICAL FOOD PACKAGING

  V. Piddubniy, H. Tarasiuk, A. Chahaida, Iu.I. Radchenko

  16-22

• INNOVATIVE TECHNOLOGIES FOR INCREASING THE TECHNOLOGICAL SAFETY OF CONVERTER PRODUCTION

  Vladislav Rumiantsev, Tetiana Sharapova, Volodymyr Netyaga

  36-42

• INTENSIFICATION OF WATER TREATMENT TECHNOLOGY BY DISCRETE-PULSE ENERGY INPUT

  Anna Lymar, Nataliia Radchenko, Heorhii Ivanytskyi, Vitalii Sydorenko, Anatolii  Dolinskyi, Oleksandr Obodovych, Bogdan Tselen

  56-61

• INTERNATIONAL ECONOMIC INTEGRATION AS A FACTOR OF ECONOMIC DEVELOPMENT

  Petru Roshka

  27-51

• INTRODUCTION OF HEALTH-IMPROVING PRODUCTS IN RESTAURANTS

  Kateryna Lakoma, Tetiana Sylchuk

  6-10

• INVOLMENT OF METALLIC NICKEL WASTE IN THE CHARGE FOR THE SMELTING OF HEAT-RESISTANT NICKEL ALLOYS

  Tetiana Nesterenko, Olha Nesterenko, Lidia Didenko, Serhii Ivannikov

  36-49

• JUSTIFICATION OF THE RECYCLING OF NATURAL RUBBER PRODUCTION WASTE FOR THE PRODUCTION OF LATEX ENR

  Dmytro Karnaushenko, Serhii Zybailo, Viktor Ved, Oleksandr Stovpnyk

  23-29

• KEY CHALLENGES IN THE FIELD OF PROCESS CONTROL WHEN USING RENEWABLE ENERGY SOURCES

  Valentin Davydov, Viktor Bielov

  87-93

• MANUFACTURE AND MANUFACTURING ORGANIZATION OF SPECIAL PURPOSE CAKE FOR RESTAURANT ESTABLISHMENTS

  Z. Shteyman, O. Pavliuchenko

  68-73

• MATHEMATICAL MODEL OF CORROSION INSIDE METAL WATER PIPES

  Huy Nguyen, Ngoc Nguyen

  37-44

• MATHEMATICAL MODEL OF PARTICLE MOTION IN A VORTEX APPARATUS

  Iryna Sokolovska, Yevhen Krytskyi

  48-55

• MATHEMATICAL MODELS, OPERATIONS RESEARCH AND DECISION-MAKING METHODS IN LOGISTICS AND PRODUCTION PROCESSES

  Volodymyr Savenko, Iryna Nesterenko, Victoria Klyuyeva, Oleksandr Polosenko, Igor Khapantsev

  34-45

• MEASUREMENT OF THE LEVEL AND ABSORPTION SPECTRUM OF MICROWAVE RADIATION BY BIOLOGICAL TISSUES

  Yulia Shtefura, Hanna Khimicheva, Kostyantyn Shevchenko

  40-46

• METER OF WEAK ALTERNATING CURRENTS

  Vladimir Startsev, Yaroslav Derevyagin, Vladimir Bekirov, Viktor Chudnovsky

  24-29

• MICROBIOLOGICAL ANALYSIS AND SANITARY AND HYGIENIC CONTROL OF RAW MILK

  Tetiana Prуlipko, Nataliia Bukalova, Nadiya Bogatko

  3-7

• MODEL AND METHOD OF CONTROLLING THE ACTIVE ZONE OF THE VVER-1000 REACTOR DURING CYCLIC TRANSIENT PROCESSES

  Victor Zubak, Valery Belousov, Vladyslav Belousov, Ivan Kipriianov

  11-20

• MODEL-ORIENTED COMPUTER-INTEGRATED SYSTEM FOR CONTROLLING THE WEAR RESISTANCE OF THE SURFACE OF HEAT EXCHANGE TUBES OF A DRUM STEAM GENERATOR AT A THERMAL POWER PLANT

  Oleksandr Brunetkin, Denys Sklifasovskyi

  61-73

• MODELING THE PRESSURE TREATMENT PROCESS

  Lilya Baleeva, Alla Gerasimova

  12-15

• MONITORING MILK ANALOGUES FOR USE IN DIETARY NUTRITION

  Maksym Hrebeniuk, Iryna Koretska

  28-35

• MONITORING OF NITRATE CONTENT IN GROUNDWATER

  S.N. Baitova, N.Y. Zhuravska

  62-67

• MULTICRITERION OPTIMIZATION AT EVOLUTIONARY SEARCH FOR TUBULER GAS HEATERS

  Kostiantyn Dudkin, Vyacheslav Irodov

  67-71