DIGITAL TRANSFORMATION OF THE HEALTHCARE SYSTEM: NEW APPROACHES TO TRAINING REHABILITATION PROFESSIONALS
DOI:
https://doi.org/10.30888/2663-5712.2025-34-05-103Keywords:
digital transformation, healthcare, medical education, prosthetics and orthotics, digital technologies, 3D-scanning, additive manufacturing, digital modeling.Abstract
This article examines current trends in the training of prosthetics and orthotics specialists within the context of the ongoing digital transformation of medical rehabilitation. The study highlights key directions in the development of the field, with paReferences
Direct Socket TF / Transfemoral Amputee Socket // Ossur UK. Available at: https://www.ossur.com/en-gb/prosthetics/sockets/direct-socket-tf.
Rysovana L., Lytvynenko M., Hryhoruk V. Prosthetics and Orthotics as a Strategic Direction in the Training of Specialists within Ukraine’s Medical Education System. // Perspectives and Innovations of Science: Journal. 2025, No. 10(56), pp. 2728–2737. https://doi.org/10.52058/2786-4952-2025-10(56)-2728-2737
Williams R, Oldfrey B and Holloway C. An at Innovator Case Study: Amparo. Available at: https://at2030.org/an-at-innovator-case-studyamparo/.
Ennion L, Johannesson A and Rhoda A. The use of a direct manufacturing prosthetic socket system in a rural community in South Africa: a pilot study and lessons for future research. // Prosthet Orthot Int. 2017;41, 455–462.
Melnichenko M. A., Spivak O. A., Kozlenko O. V., & Klymuk O. S. Modern prosthetics using 3D printing. // Proceedings of the XXII International of the Scientific and Practical Conference "History of the Development of Science, Technology and Education: High Technologies and Modern Challenges". 2024, 195-198.
World Health Organization Global Report on Assistive Devices. Global Report on Assistive Devices. 2022, Vol 1; 1–11.
Radzishevska Ye., Rysovana L., Matsko A. Innovative Experience of Kharkiv National Medical University in Integrating the HELSI Medical Information System into the Professional Training of Future Physicians. // Perspectives and Innovations of Science: Journal. 2025, No. 11(57), pp. 3558–3569. https://doi.org/10.52058/2786-4952-2025-11(57)-3558-3569
Beygi B Hassan, MS Wong. Contemporary and Future Development of 3D Printing Technology in the Field of Assistive Technology, Orthotics and Prosthetics // J Can Prosthet Orthot. 2023 Dec 22;6(2):42225. doi: 10.33137/cpoj.v6i2.42225
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
