… In this paper, the problem of parametric identification … the accuracy in determining the
parameters. To solve this problem, a … on availability of deposits on the condenser tubes surface, …

… They are 24 stage once through condensing turbines with 3 … The methods used to help
identify this parameter, was again … , foreign object damage and deposits are combined however …

… component under determination by using a baseline method. … cleaning of the turbine
condenser, deposits are found inside. … temperature values promote a faster growth of deposits. …

… and output, such as deposits on blades and erosion of internal … detection requires special
test instrumentation. Much useful … turbine output will be less that expected at datum condenser …

… technical system within the condensing power plant. In doing so, … of the flow section (sediment
deposits, increase in the flow … itself, the identification and diagnosis of various parameters …

… of a steam turbine plant within a condensing power plant. … the efficient and simple
determination of parameters for making … according to Pahl et al. to a steam turbine plant within a …

… , the air-cooled condenser, and the condensate extraction … Table 1 shows the measured state
parameters utilized in the … the ST is the identification of the reference performance baseline. …

… power plant, different sources of impurities may be identified: … blowthrough and extraction of
deposited water. Smooth regular … The turbine operated with a lower load and high condenser …

… Copper is initially corroded from condenser and feedheater tubes … conditions are quickly
reduced to lower pressure values that … Copper was identified to be one of the main components …

… , super-heaters, turbines and condensers, this subject is … ) aimed at possibly identifying those
contaminants which could … a minimal deposit while the model has similar values to the third …